Home
The part number consists of 3 parts:
| JDG3-3-50 | This part is a 3-Axis g-force sensor. The other option would be JDG2 for a 2-Axis g-force sensor. |
| JDG3-3-50 | The (typical) full scale response of this sensor is +/-3g's on each of its axes. |
| JDG3-3-50 | This parameter indicates the cutoff of the first order filter. The filter
is factory set and can not be changed by the user. The default filter rate is 50Hz.
Filter settings available are: 1Hz, 2Hz, 5Hz, 10Hz, 20Hz, 50Hz, 100Hz, 200Hz, 500Hz. The sample rate should be set to at least twice the filter frequency. This is required to satisfy the Nyquist criteria - avoiding higher frequency g-force components appearing as low frequency g-force components. |
